Offshore Metal Structure Quick Drying Metal Primer Wearing
Resistant Two Component
This product consists of epoxy resin,zinc powder,pigments and
additives composed of two-component
anti-rust primer,with excellent corrosion resistance.
With cathodic protection,excellent rust resistance
Excellent adhesion on sandblasted steel
Has a good welding performance
Has good water resistance,oil resistance and solvent resistance
Dry and fast,with good construction performance
Scope of application
It can be applied to the painting of steel structures,storage
tanks,bridges,etc.It can also be used for anti-corrosion coating of
chemical plants,chemical fertilizer plants,power plants,oil
refineries,paper mills and sewage treatment plants.
|Specific weight||about 0.85kg/L|
|Dry film thichness||60µm|
|Wet film thickness||120µm|
|Formulation:Part A:Drier:Water||10:1:1(weight ratio)|
|Drying time||(25℃)Dry≤th Dry≤24h Completely dry 7 days|
|Items||Indicator||Testing method||Items||Indicator||Testing method|
|Color||Various colors||GB/T9281-2008||Alkali resistance|
|Specific weight||1.2±0.05g/cm3||GB/T6750-2007||Sphere reflection||≥70% (0.3-1.3μm)||JC/T1040-2007|
|Theoretical coverage||7~8m2/kg(50μm)||Calculated value|
- Thoroughly stir the B component thoroughly before use,and mix the A
and B components by mixing until they are ready for use.
- During the construction of high temperature season,dry spraying is
easy to occur.To prevent the dry spray phenomenon from
occurring,special thinner must be added to adjust the dry spraying.
- Before coating after coating,must completely remove the surface of
zinc salt to prevent affecting the paint film adhesion.
- The paint storage ventilation,cool,dry place,the construction site
should strengthen the ventilation exhaust.
The data, usage, and recommendations of the above products are
based on experimental and actual use experience and are only used
as a construction reference.
For the construction that we cannot meet the situation,our company
only guarantees the quality of paint products.
If there is any change in the above data,the latest information of
the company shall prevail.No further notice will be given.
|Relative humidity||80% or less|
|Mixing ratio:Main paint||Main paint:Part B:water=10:1:1(weight ratio)|
Stir for 15 minutes with a mechanical stirrer until uniform and
dilute with appropriate amount of water.
Available after mixing:4 hours(20℃)
|Curing period||5 minutes|
|Drying time||Table dry≤30 minutes hard work≤24 hours|
|Repainting time||24 hours|
|Construction methods||brushing,roller coating or spraying|