Zinc Phosphate Grey Oxide Anti Rust Primer Paint Quick Drying Eco
A single pack, fast drying, high build, anticorrosive metal primer.
Fast drying, extremely versatile coating for new construction
work.Suitable for ‘blast, fabricate & prime’ methods under
controlled workshop conditions.
Good resistance to undercutting from damage points.
Can be overcoated with chlorinated rubber, alkyd systems and
Can be used as a primer beneath intumescent coatings.
|Typical Applications||Application Methods|
|Gates & Railings||Electrostatic Spray|
|Structural Steelwork||Brush / Roller|
|Plant & Machinery|
|Volume Solids 45%||Touch Dry 15 - 30 Mins|
|D.F.T.50 microns||Dry To Handle 2 Hours|
|Theoretical Spread Rate 9.0m2/ Ltr||Overcoating Min 4 Hours Max 16 Hours|
Substrate treatment: Removing dust, grease, water and other debris on the surface.
Before painting, steel surface must be adopted sand-blasting with
Sa2.5 degree rust removal. For the segment butt joints and
unattainable position for sand-blasting, it is adopted power tools
to mechanical polishing rust removal with St3 degree.Coating accessory: Epoxy ester primer, two component epoxy primer.Paint thinner: AB115T paint thinner
Brush coating/Roller coating
Min. 3h Max. unlimited
Tools cleaning: All tools after use need cleaning with AB115T thinner.
Safety: Be careful to use this product. Please note the safety precautions
on the package label before or when to use it. In addition, you
should comply with the safety regulations of the state or local
government. Personal protection, including but it’s not limited to
lung, eye and skin. To see a doctor if swallowing or other direct
contact with this product. Precautions must be taken: fire
prevention, explosion prevention and environmental protection. The
construction of this product should only be in a well-ventilated
case. Powerful ventilation must be provided when applying paint in
a narrow place or stagnant air.
- Construction temperature is 5~40 ℃.
- Air relative humidity is less than 80%.
- The substrate surface humidity is 3 ℃ higher than the dew point.
- Avoid construction in the rain, snow, fog weather.
- Before coating the next paint, oil, condensate water, Welding
splash drops and dust should be cleaned up on the surface of
- Recoat interval is related to the environment. If maximum recoat
interval is exceeded, the surface have to be roughened to ensure
the adhesion between layers.
- Paint should be stored at low temperature, dry and ventilated
indoor warehouse. Keep away from heat and avoid direct sunlight.
- Construction workers should be required to wear labor protective
gear. Construction site and storage should be equipped with
fire-fighting equipment. To avoid fire, fire and smoking is
- This product is only suitable for professional use.
Packaging: 10Kg/barrel, 20Kg/barrel or according to customers' request.
Shelf life: One year in dry and ventilated place with unopened condition.
◆Surface treatment: safely remove the floating ash, floating rust,
oil stain and other impurities on the surface of the workpiece to
be coated, so that the surface of the workpiece to be coated is
clean and dry;
◆Construction method: roll coating;
◆ Thinner: pure water or clean tap water;
◆Dilution ratio: add 10%~20% of the original paint weight, or
adjust according to the specific conditions;
◆Construction viscosity: roll coating viscosity: 70~100 seconds
(coating -4 cups, 23±2°C), or adjusting according to customer
◆ Drying method: 220±2°C (plate temperature), constant temperature
baking for 70~90 seconds;
◆ Dryness test method: use a cloth with a concentration of 95%
alcohol to rub back and forth 30 times, and then use a nail to
scrape (the paint film is not soft, the scratch is not acceptable);
◆Coating area: ≥18 m2/kg (single layer dry film thickness 15μm
~20μm), the actual coating area is related to the specific
construction thickness (dry film).
◆The degree of quality of metal substrate treatment will directly
affect the final effect and protective performance of the film;
◆ This product should be stored in a cool and ventilated place, the
temperature is 0 °C ~ 40 °C, the validity period is half a year; if
it exceeds the storage period, it can still be used after passing
Go Further, Do Better !!!